Study of blood collection and sample preparation for analysis of vitamin D and its metabolites by liquid chromatography–tandem mass spectrometry

The analysis of vitamin D status, with special emphasis on 25-hydroxyvitamin D and 1,25-dihydroxyvitamin D, is gaining interest in clinical studies due to the classical and non-classical effects attributed to this prohormone. In this research, the influence of the two steps preceding determination (viz. sample collection and preparation) on the quantitative analysis of vitamin D and its more important metabolites has been studied. Two preparation approaches, deproteination and solid-phase extraction (SPE), have been evaluated in terms of sensitivity to delimit their application, thus establishing that detection of 1,25-dihydroxyvitamin D cannot be addressed by protein precipitation. Concerning sample collection, serum and plasma reported high accuracy (above 83.3%) for vitamin D and metabolites, while precision, expressed as relative standard deviation, was below 12.9% for all analytes in both samples. Statistical analysis revealed that serum and plasma provided similar physiological levels for vitamin D₃, 24,25-dihydroxyvitamin D₃ and 25-hydroxyvitamin D₃, while significantly different levels were obtained for 1,25-dihydroxyvitamin D₃, always higher in plasma than in serum. Sample collection and treatment have proved to be significant in the analysis of vitamin D and its relevant metabolites.     

New di‐ and triorganotin(IV) carboxylates derived from a Schiff base: synthesis,characterization and in vitro antimicrobial activities

A new carboxylic acid, 2‐{[5‐(2‐nitrophenyl)furan‐2‐yl]methyleneamino}benzoic acid (HOBZ), has been produced by reacting 5‐(2‐nitrophenyl)furfural with 2‐aminobenzoic acid. Reactions of NaOBZ with organotin chlorides led to formation of [Me₃Sn(OBZ)] ( 1 ), [Bu₃Sn(OBZ)] ( 2 ), [Me₂Sn(OBZ)₂] ( 3 ) and [Bu₂Sn(OBZ)₂] ( 4 ). Complexes 1 , 2 , 3 , 4 have been characterized using elemental analyses and infrared, ¹H NMR, ¹³C NMR, ¹¹⁹Sn NMR and ¹¹⁹Sn Mössbauer spectroscopies. In the solid state, the OBZ ligands might coordinate to tin in an anisobidentate fashion via the carboxylate group. The in vitro antimicrobial activity of all compounds has been screened against the following fungi: Aspergillus niger, A. flavus, A. parasiticus, Penicillium citrinum, Candida dubliniensis, C. lusitaniae, C. albicans, C. tropicalis, C. parapsilosis and C. glabrata; and against the following bacteria: Staphylococcus aureus, Listeria monocytogenes, Bacillus cereus, Streptococcus sanguinis, Escherichia coli, Citrobacter frendii, Salmonella typhimurium and Pseudomonas aeruginosa. Complexes 2 and 4 exhibited higher biocide activity in comparison to 1 and 3 and to the control drugs nystatin and miconazole nitrate for the yeasts, and chloramphenicol and ampicillin for the bacteria. The biological activity of 2 was superior to that of 4 . In addition, the toxicity of HOBZ, NaOBz and 1 , 2 , 3 , 4 were determined using Chlorella vulgaris, revealing low toxicity of the complexes at MIC₅₀ concentrations. We also performed cell viability studies, using XTT assay, displaying no change in the mitochondrial function after 2–4 h of exposure of the microorganism to the complexes at MIC₅₀ concentrations. The butyl‐containing complexes 2 and 4 display greater lipophilicities than do the methyl analogues 1 and 3 , thereby endowing 2 and 4 with superior abilities to cross the microbe cell membrane, the possible mechanism of action. Copyright © 2015 John Wiley & Sons, Ltd.     

Investigation on Three-Dimensional Solubility Parameters for Explanation and Prediction of Swelling Degree of Polydimethylsiloxane Pervaporation Membranes

Using polydimethylsiloxane (PDMS) as a basic matrix to prepare ethanol and butanol permselective pervaporation membranes is a vibrant field. Many studies have verified that the three-dimensional Hansen solubility parameters (HSP) theory offers a valid explanation for the swelling performance of ethanol and butanol in PDMS. Five parameters (δ_D, δ_P, δ_H, δ_t, and R_a) are defined in HSP theory which can be individually used to explain the interaction strength between a solvent and a polymer. However, for the above five parameters, which one is the most effective parameter for deciding the swelling degree still needs to be determined. In this study, a commonly used hydroxy-terminated PDMS precursor was adopted to prepare the PDMS network. The HSP of the chosen PDMS precursor was measured by an advanced “solubility-rating” method. The special software package HSPiP (4.1.03), purchased from the HSPiP team, was used to process the “solubility-rating” results. The equilibrium swelling degree (Q value) of the PDMS network in water, ethanol, butanol, and toluene was measured and the relationships between the five HSP parameters of the solvents and the logarithmic equilibrium swelling degree, log(Q), were discussed. It was found that the measured polar parameter, δ_P, of PDMS was 0.12 MPa^0.5. The measured hydrogen bonding parameter, δ_H, was larger than δ_P, attaining a value of 8.6 MPa^0.5, because the hydroxy groups directly contributed to the hydrogen bonding solubility parameter, δ_H. With respect to the relationships between log(Q) and δ_D, δ_P, δ_H, δ_t, and R_a, linear relationships existed after plotting log(Q) vs. δ_P and log(Q) vs. δ_H. The linear relation degree of the fitted lines was 0.995 and 0.989, respectively. Their standard deviations were 0.149 and 0.232, respectively. Therefore, a better linear relationship existed between log(Q) and δ_P than the other solubility parameters. This indicated that the polar interaction was the main effect for deciding the swelling degree of the PDMS network in water and alcohol systems.     

Theoretical studies of the dependence of EPR g-factors on local structure for the trigonal Er3+–VK centres in KMgF3 and KZnF3

The dependence of the EPR g-factors on the local structural parameter for a 4f¹¹ configuration ion Er³⁺ in a trigonal crystal-field has been studied by diagonalizing the 364×364 complete energy matrices. Our studies indicate that the EPR spectra of the trigonal Er³⁺–V_K centers in KMgF₃ and KZnF₃ may be attributed to the translation of the cubic Kramers doublet Γ₇. Furthermore, the EPR g-factors of the trigonal Er³⁺–V_K centers may be interpreted reasonably by the shifts ΔZ≈0.340 Å and ΔZ≈0.303 Å of the Er³⁺ ions toward the charge compensator V_K along the C₃ axis for the KMgF₃:Er³⁺ and the KZnF₃:Er³⁺ systems respectively.     

Azobenzene‐Functionalized Cage Silsesquioxanes as Inorganic–Organic Hybrid,Photoresponsive, Nanoscale,Building Blocks

Mono‐ and octa‐azobenzene‐functionalized cage silsesquioxanes were easily synthesized by the reaction of 4‐bromoazobenzene with monovinyl‐substituted octasilsesquioxane and cubic octavinylsilsesquioxane through the Heck coupling reaction. Excited‐state energies obtained from time‐dependent density functional theory (TDDFT) and the CAM‐B3LYP functional correlate very well with experimental trans–cis photoisomerization results from UV/Vis spectroscopy. These azobenzene‐functionalized cages exhibit good thermal stability and are fluorescent with maximum emission at approximately 400 nm, making them potential materials for blue‐light emission.     

Synthesis of flower-like WS2 by chemical vapor deposition

Flower-like tungsten disulfide (WS₂) with a diameter of 5-10 μm is prepared by chemical vapor deposition (CVD). Scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), Raman spectroscopy, and ultraviolet-visible (UV-vis) spectroscopy are used to characterize its morphological and optical properties, and its growth mechanism is discussed. The key factors for the formation of flower-like WS₂ are determined. Firstly, the cooling process causes the generation of nucleation dislocations, and then the "leaf" growth of flower-like WS₂ is achieved by increasing the temperature.     

Investigation of mononuclear,dinuclear, and trinuclear transition metal (II) complexes derived from an asymmetric Salamo‐based ligand possessing three different coordination modes

A new asymmetric Salamo‐based ligand H₂L was synthesized using 3‐tert‐butyl‐salicylaldehyde and 6‐methoxy‐2‐[O‐(1‐ethyloxyamide)]‐oxime‐1‐phenol. By adjusting the ratio of the ligand H₂L and Cu (II), Co (II), and Ni (II) ions, mononuclear, dinuclear, and trinuclear transition metal (II) complexes, [Cu(L)], [{Co(L)}₂], and [{Ni(L)(CH₃COO)(CH₃CH₂OH)}₂Ni] with the ligand H₂L possessing completely different coordination modes were obtained, respectively. The optical spectra of ligand H₂L and its Cu (II), Co (II) and Ni (II) complexes were investigated. The Cu (II) complex is a mononuclear structure, and the Cu (II) atom is tetracoordinated to form a planar quadrilateral structure. The Co (II) complex is dinuclear, and the two Co (II) atoms are pentacoordinated and have coordination geometries of distorted triangular bipyramid. The Ni (II) complex is a trinuclear structure, and the terminal and central Ni (II) atoms are all hexacoordinated, forming distorted octahedral geometries. Furthermore, optical properties including UV–Vis, IR, and fluorescence of the Cu (II), Co (II), and Ni (II) complexes were investigated. Finally, the antibacterial activities of the Cu (II), Co (II), and Ni (II) complexes were explored. According to the experimental results, the inhibitory effect was found to be enhanced with increasing concentrations of the Cu (II), Co (II), and Ni (II) complexes.     

Novel flame retardant paint based on Co(II) and Ni(II) metal complexes as new additives for surface coating applications

The study is focused on the synthesis of a new Co(II) and Ni(II) metal complexes, which is synthesized by the reaction of the isatin 4‐aminoantipyrine Schiff base ligand with selected divalent Co(II) and Ni(II) ions and their possible applications as flame retardant additives in paint formulations for surface coating application. The prepared metal complexes were characterized using a combination of Fourier transform infrared, elemental analysis, proton nuclear magnetic resonance, ¹³C‐NMR spectra, and mass spectroscopy. The prepared Schiff base ligand metal complexes were physically added to alkyd paint formulation to give coating formulations at a laboratory scale and then applied onto plywood and steel panels using a brush. The ignitability and oxygen index values obtained indicated that the paint which contained the prepared Co(II) and Ni(II) metal complexes as additives exhibited very good flame retardant. The physical and mechanical characteristics of the coatings were studied in order to estimate any disadvantages due to the incorporation of the additives. It was discovered that the added substances did not impact the hardness, flexibility, and adhesion of the prepared coating films. The gloss of the paint formulation film was improved due to the incorporation of the aromatic ring into the formulation and the level of the oil percent.